Your new safety razor is daunting (but kinda thrilling), that new soap bowl is super cool, and you love the scent of your chosen aftershave… but do you know how to use shaving soap? When you face that heavenly hunk of pure soap, there’s only one thing to do.
Grab your brush and whip up that lather.
In this guide, you’ll find out exactly how to use a shaving soap properly in just three simple steps.
Simple Steps for Using a Shaving Soap
Before we start, there are a few things you need:
- Shaving soap (duh)
- Razor
- Warm water
- A calm and quiet place you won’t be distracted
- Mirror
- Shaving bowl or container to whip the soap in
- Shaving brush – boar/badger hair or vegan alternative
If possible, buy a selection of sample-size soaps to try. There are many different kinds, so you might not find your dream soap immediately.
You can make-do with a tupperware container or cereal bowl instead of a shaving bowl, but it’s hard to replace a shaving brush.
The bristles on the brush lather up the soap but also apply the soap to your face. Start with a medium-soft bristle that will gently exfoliate and apply a good lather. The super tough bristles are best left alone.
Step 1 – Set up
If this is your first time shaving with a safety razor, we advise that you get comfortable and make sure you won’t be distracted mid-shave. This is because you do not want to rush.
A slow and steady shave = smooth and cut-free skin.
Get the water warm and wash the area you want to shave. You might like to use a simple glycerin soap before you lather and apply the shaving soap. This will soften your skin and remove any dirt/bacteria.
You could take a shower or bath instead!
Next, read the instructions for your new shaving soap. If it’s a hard soap, you might simply place the entire soap in the bowl. For softer soaps, you may need to cut/pull off a small amount and only use that in the bowl.
If you have a bowl-shaped soap, see the video in the next section.
Step 2 – Lather time
Wet your shaving brush (or pre-soak it) and add a few drops of water to the shaving soap in your bowl. You can always add more water, but you can’t really take it away. So, add a little at a time.
If your hard soap is really hard, you can douse it in hot water and cover it for 5 to 10 minutes. This will soften it enough to lather up. We call this pre-soak “blooming”.
Make sure your brush is coated in warm water and soap, then start whipping it up in a circular motion. Keep on whipping until you have a thick foam composed of many tiny bubbles. It should hold its shape, like whipped cream.
This video by Dapper Shave shows a good technique for whipping soap and the foam density you should be aiming for.
If you’re struggling to get a good lather, keep practicing!
If you think the bowl might be the problem, read our guide to the Best Shaving Bowls for The Smoothest Lathers.
Step 3 – Apply the soap
Make sure your brush is coated with as much lather as it can hold, then apply it to your face or wherever you want to shave.

Use a circular motion to apply the soap to your face – just like when you whipped the soap up. This lathers the soap further and the bristles of the brush make sure all sides of your hairs are coated. As a bonus, it also has a gentle exfoliating effect.
Don’t apply the lather like you’re painting the side of a house! The up-down and stroking motion just won’t work.
Once your skin is lathered up, grab your razor and get shaving.
Read next: our guide to the perfect wet shave experience, from lathering your soap to applying aftershave.
Hard Shaving Soap vs Soft Shaving Soap
The only difference between a hard shaving soap and a soft shaving soap is the texture. You won’t miss out or be at a disadvantage by choosing one over the other!
Traditionally, hard shaving soaps were all the rage. These soaps have been triple-milled, which simply means that as much moisture has been removed as possible. So, you’re left with a rock hard chunk of soap.
Hard shaving soap lasts longer and creates a lovely lather, but you’ll need a strong arm to whip it up.
On the other hand, soft shaving soaps are more malleable – a cold Blu-Tack consistency. They aren’t triple-milled and there’s quite a bit of moisture left in the soap.
Soft shaving soap is used up quicker and doesn’t create as rich a lather, but it’s much easier to whip up.
What Makes a Good Shaving Soap
For wet shaving, you need a good shaving soap. That means a soap that creates a rich and foamy lather. This is really important for several reasons:
- It softens your skin and opens your pores,
- This allows your hairs to fully extend,
- Your hairs will soften too,
- It will moisturise your skin as well.
As a result, you get a very close and smooth shave. Your hairs are easily cut and fully extended, so they are cut very close to the skin. Your skin is soft and pliant too.
Using a good shaving soap means the blades of the razor glide over your skin, rather than catch. So immediately, you’ve prevented razor burn and can shave over the natural curves and contours of your skin without nicking yourself.
A good shaving soap makes the shave feel better, and your skin look better afterwards.
Read next: 9 Best Shaving Soap Bars for Men and Women
Moisturising Properties
Glycerin and fat are the key ingredients in your shaving soap. But don’t worry, both can be derived from vegetables so finding an eco-friendly and vegan shaving soap is quite easy.
The glycerin has softening and protective properties. It’s an emollient, which means it locks hydration into your skin and creates a protective barrier over the top. This keeps your skin moisturised and it also softens the hairs.
The fat content is really important too. It acts as a lubricant and an additional layer of protection. When you run the razor blade over your skin, the fat layer in the soap helps it glide smoothly and protects your skin beneath it.
3 Natural Ingredients to Look For

Many hard and soft shaving soaps will contain these ingredients, especially if they’re made with natural formulas. If you have a particular skin concern (e.g. shaving with acne, dry skin, ingrown hairs, etc) then discovering the benefits of individual ingredients will help you pick the perfect soap.
Coconut oil
This ingredient produces a rich lather and is deeply moisturising. Coconut oil shaving soaps are great for anyone with dry and sensitive skin. Coconut is not the most eco-friendly ingredient (there’s a lot of travel involved, as we can’t grow coconuts in the UK) so make sure it’s responsibly sourced and organic if possible.
Shea butter
Another nourishing and moisturising ingredient. Shea butter is common in moisturising creams. It’s great for reducing inflammation and is virtually hypoallergenic. If you often get redness, itching and razor burn after shaving, shea butter shaving soap can prevent this.
Essential oils
Besides smelling great, essential oils also benefit your skin. Tea tree oil, for example, has antiseptic and antibacterial properties, which soothe acne and prevent your pores getting infected after shaving.
Other popular essential oils to look for in shaving soaps include:
- Sandalwood – soothes irritation and has anti-aging properties.
- Peppermint – brightens your skin tone and feels refreshing for a morning shave.
- Rosemary – astringent and antimicrobial, so great for acne-prone skin.
Important note: essential oils should never be applied directly to your skin unless they’ve been diluted with other ingredients (like in shaving soaps and moisturisers). If you have very sensitive skin, use an unscented soap instead.
More Resources for Traditional Eco Shaving
Wait, you haven’t visited our Eco-Friendly Shaving Hub yet? What are you waiting for? We have tonnes of resources here for new shavers, from finding a great shaving soap to the perfect technique for a double edged safety razor.
How useful was this post?
Click on a star to rate it!


